उत्पाद वर्णन
Details:
AUTOMATIC AUGER FILLER WITH SCREW CONVEYOR :
| Sealing | Center seal |
|
| Pouch size | Pouch width up to 150 mm width roll width 320 mm. Length controlled as per eye mark-no restriction |
|
| Range | From 200 gms to 1000 gms. With using change parts |
|
| Out-put pouches per | 20 to 30 ppm It also depends upon the kind, quality and thickness of laminate used. |
|
| Suitability | Any heat sealing films (laminates) or Alum foil based material. |
|
| Power Requirement | 5 KW.( motor,Main motor, Heaters) |
|
| Heaters | Cartridge type ( 6 nos.) 250W x 6 |
|
| Sealing | Through Pneumatic actuated for Vertical and Horizontal sealing. |
|
| Control Part | PLC with a 2 line 20 character HMI display. Telemechanique contactors. Selectron indicating type Temperature controller. |
|
| Electrical stability | Machine must get 415 V / 50 Hz constant supply, if not you must connect a stabilizer or CVCF. |
|
| Registration system |
Photocell control using optical scanning head sensor. |
|
| Paper pulling | Roller type. |
|
| Horizontal sealing | Pneumatic. |
|
| Vertical sealing | Pneumatic. |
|
| Filler type | Servo based. |
|
| Air requirement | 750 Ltr / min Capacity @ 6.5 kg dry Air Pressure. |
|
| Pneumatics | Janatics |
|
| Reel Feed system | Single Reel film laminate feed. |
|
| Roll Diameter |
Max 12 inches. |
|
Material of construction:-
| Contact Part | Stainless Steel 304 |
| Non-contact Steel / MS parts like body | Painted & 18 SWG thickness or Electrolyses Nikel plating. Bolts & Nuts of Stainless Steel. painted |
| Electrical Panel |
SS 304 |
| Mounting |
Vibration absorbing self allying pads |
| Overall Dimension including Electrical panel & Un-wind | 5ft( width) X5 ft ( depth) X 8 ft ( height) |
| Filling unit |
AUGER FILLER |
|
Pouch cutting - Horizontal cutting (along the width of the sachet ) | Zig Zag cutting blade |
| Accuracy | +/- 1.0 % Per 100 Consecutive Weights Actual accuracy depend upon type of product and consistency in it's flow characteristics |
SCREW CONVEYOR:
Conveying capacity 100 Kg to 1000kg /Hour
Size 4X 3000mm LONG
Hopper Capacity 500 kg approx
Hopper size1000 mm X 600 mm Height ( Conical type).
Drive 1HP Motor,1 :40 Ratio gear drive
Inclination30 to 40 Degree
Castor wheel provided
जांच भेजें
जांच भेजें
एसएमएस भेजें
मुझे निःशुल्क कॉल करें
